
CME1056
May 2000
Page 10
Bin Thermostat: Installation
The bin control is a thermostat. Its bulb must be
deployed after the ice machine has been placed
on the bin or dispenser.
Before starting, remove the left side panel and any
baffle in the bin.
1. Locate bin thermostat bulb.
2. Route bulb thru routing hole (located between
the compressor and the reservoir).
3. Locate bin thermostat bracket.
4. Carefully position the thermostat bulb on the
bracket.
5. Fasten the bracket to the bottom of the ice
machine with the two 3-pronged knobs supplied
with the unit.
6. Pull back into the ice machine any excess
capillary tubing.
7. Return the baffle to the bin and continue with
the installation.
Bin Thermostat Altitude Correction Table
CW Turns of Range Screw (under plastic cover)
Feet Turns Feet Turns
2000 55
o
8000 340
o
4000 160
o
9000 385
o
6000 250
o
10000 405
o
Use This Table to Adjust Thermostat
Routing Hole
Insert Tip
Komentarze do niniejszej Instrukcji