Scotsman C1448R Instrukcja Użytkownika Pobierz pdf (Strona 104)

Repair Procedures

Inlet Water Solenoid Valve

1 Disconnect electrical power

2 Shut off the water supply.

3 Remove front and left side panels.

4 Unplug wire from coil.

5 Disconnect water supply tube from the

inlet of the valve.

6 Disconnect the water outlet tube.

7 Remove the two mounting screws holding the valve to the back panel.

8 Pull the valve forward and out of the machine.

Fan Blade or Motor

1 Push and release the Off button

2 Disconnect electrical power.

3 Remove front panel, sound shield and left side panel.

4 Unplug fan motor wire leads.

5 Remove fan motor mounting brackets from shroud. Note: Fastener size is 3/8” hex

6 Carefully remove fan motor and blade assembly from machine cabinet.

7 Loosen set screw, pull fan blade from motor shaft.

8 If the blade is the only part being changed, reverse to reassemble. Note: blade mounts

purge to end of motor shaft.

9 If the motor will be changed, remove mounting brackets from fan motor. Note: Fastener

size is ¼” hex.

10 Reverse to reassemble.

September 2006 Page 104

Electrical Shock Hazard.

Disconnect electrical

power before beginning.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 127 128

Brak uwag

Scotsman C1448R Instrukcja Użytkownika Strona 104