Scotsman CME500 Instrukcja Obsługi Pobierz pdf (Strona 11)

Use

Basic Model

After the ice machine has operated for a few hours,

the HD dispenser can be used. Pushing the ice

chute back will activate the dispense mechanism

and ice will drop out of the chute into the user’s

container.

Coin/Token Model Operation

Without activation the dispenser will not dispense

ice when the ice chute is depressed.

To activate the dispense system, the user must

insert a quarter or a token in the coin mechanism.

If the quarter or token is accepted, the Ready Light

above the ice chute glows green, indicating that ice

can now be dispensed. The dispense system will

allow ice vending for a pre-set time. Once armed,

pushing the chute in (like the basic model) causes

the ice to vend. At the end of the pre-set time

vending stops.

Free Vend: There is a free vend switch inside the

unit, switch it to ON to by pass the coin mechanism

and vend ice anytime the chute is pushed back.

When switched to Free Vend the Ready light will

be ON.

When switching from Free Vend to Coin / Token

operation the Ready light will be ON for a few

seconds.

Water Station Model

In addition to dispensing ice like the Basic model,

the water sation model has a water faucet located

to the left of the ice chute. The water’s temperature

is not affected by the dispenser. Pushing in on the

faucet lever opens the valve and water flows out

into the users container.

HD22 and HD30

September 2003

Page 11

Push the chute back to dispense ice

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Scotsman CME500 Instrukcja Obsługi Strona 11