Specifications & Limitations
This dispenser is designed to be installed and
operated indoors, in a controlled environment. Its
minimum and maximum operating temperature
limits are the same as those for the ice machine.
Minimum Maximum
Air Temp 50
o
F. 100
o
F.
Voltage 60 Hz 104 126
Check the nameplate, located on the back of the
cabinet for specific information.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Models
There are three versions of the HD30 dispensers:
Basic, Coin/token and Water Station. The Basic
version is constructed to deliver ice when the ice
chute is pushed in, and it continues to vend ice as
long as the ice chute is held in.
The Coin/token version is designed to deliver ice
after a coin or token is inserted into the coin slot
AND then the ice chute is pushed in. Ice vending is
limited to a preset time per coin or token use.
Coins or tokens are collected in a coin box at the
bottom of the dispenser. A keyed door allows
access to the coin box without removing the front
panel.
The Water Station version is a Basic version with a
mechanical water faucet added to the left of the ice
chute. Water is dispensed whenever the faucet
lever is pushed back. The HD30 is available in all
versions, the HD22 is only available as a Basic
model.
50 Hz.
The Basic models of the HD22 and HD30 are
available in 230 volt 50 Hz electrical for those
countries with that type of electrical service.
Kits:
A bin top adapter kit is also available to allow
placement of a Scotsman EH222, CME686 or
CME810 Eclipse ice making head on the
dispenser.
·
The HD22s kit number is KBT36.
·
The HD30s kit number is KBT32.
There is also a kit that can be installed on a
HD30N (coin operated model). That kit is a coin
counting timer that can be adjusted to accept more
than one quarter before activating the dispense
mechanism. The kit’s part number is 12-2909-21.
No other kits are available.
HD22 and HD30
March 2009
Page 3
(24 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji